Skip to content

HYBON • Elevator planning guide • Updated 13 November 2026

Escalator and Moving Walkway Guide: Types, Planning and Safety

At a glance

Escalators move pedestrians between levels; moving walks cover horizontal or inclined routes. Selection depends on traffic, rise, available space, operating duty and the building structure. Provide an accessible lift route as well, and follow the equipment’s rules for wheelchairs, trolleys and pushchairs.

Escalators and moving walks support pedestrian circulation in malls, transport hubs and large buildings. Plan them alongside accessible lifts and the building’s evacuation strategy. This guide explains the selection, structural and operating questions to resolve before ordering.

How Does an Escalator Work?

An escalator is a moving staircase. A motor and drive turn a chain of steps that rises and flattens at the top and bottom, while handrails move at the same speed as the steps. The whole system sits in a steel structure called the truss, which carries the load to the building.

Types of Escalators and Moving Walks

  • Standard escalators: The usual choice for malls, offices and public buildings, available with different step widths and duty ratings.
  • Heavy-duty escalators: Built for high traffic and long operating hours, such as metro stations, airports and transport hubs.
  • Inclined moving walks: Sloping walkways with a flat surface, used on some shopping and transport routes. Trolleys require equipment specifically designed for them; follow manufacturer signage and provide a lift route for wheelchairs and pushchairs.
  • Horizontal moving walks: Flat walkways that cover long distances in airports and large complexes.

Key Specifications to Know

  • Step width: Commonly around 600, 800 or 1000 mm. Wider steps carry more people and allow a bag to be carried comfortably.
  • Angle of inclination: Commonly 30 degrees, and sometimes 35 degrees where space is limited. A gentler angle feels safer and gives a smoother ride but needs more horizontal space.
  • Speed: Commonly around 0.5 metres per second for escalators. Moving walks may run at different speeds depending on the design.
  • Vertical rise: The height between the two floors. This decides the length and structure of the truss.
  • Capacity: The number of people the escalator can move per hour, which depends on step width and speed.Always confirm the exact values and tolerances with your manufacturer and the applicable standards.

Planning an Escalator Installation

  • Floor-to-floor height and structure: The truss needs supports at both ends and sometimes in the middle, so involve your structural engineer early.
  • Space at the top and bottom: Passengers need clear landing areas, so crowds do not block the entrance and exit.
  • Traffic planning: Decide how many escalators and in which direction, including pairs for up and down.
  • Fire safety: Escalator openings in floors are part of the building’s fire strategy, so check what is required in your building.
  • Location: Put escalators where people naturally walk, with clear signage and lighting.

Safety and Compliance

  • Handrail speed matching: Handrails should move at the same speed as the steps.
  • Comb plates and skirt panels: Designed to reduce the risk of trapping shoes, clothing and fingers.
  • Emergency stop buttons: Easy to see and reach at both ends.
  • Brakes and safety switches: Stop the escalator if something goes wrong, such as a broken chain or a missing step.
  • Clear signage: Instructions for children, loose clothing and bulky items.
  • Lighting: Good lighting at the entry and exit and under the steps for visibility.

Escalators should meet applicable standards and state requirements for registration and inspection. Check what applies to your building with your architect and local authority.

Energy Efficiency

An escalator that runs all day uses a lot of power even when nobody is on it. Modern drives allow energy-saving features such as slowing down or stopping when there are no passengers and starting when a sensor detects someone. Ask your provider which options are available.

What Affects the Cost of an Escalator?

  • Vertical rise and step width
  • Heavy-duty or standard duty rating
  • Indoor or outdoor installation
  • Finishes, such as glass balustrades and lighting
  • Energy-saving and monitoring features
  • Structural and civil work for the truss and openings
  • The maintenance plan after installation

Maintenance Matters

Escalators have many moving parts and run for long hours, so regular servicing is essential for safety and reliability. A maintenance contract with a quick breakdown response keeps passengers safe and avoids long shutdowns. Our guide to a lift AMC explains what a good contract should include.

A Checklist Before You Order

  1. What vertical rise and traffic must the escalator handle?
  2. Which step width, angle and speed are right for our building?
  3. Is the structure ready for the truss, or will it need strengthening?
  4. Is there enough clear space at both landings?
  5. Which safety features are included, such as emergency stops and brakes?
  6. What energy-saving options are available?
  7. Which certifications does the manufacturer hold?
  8. What does the AMC cover, and is service available 24×7?

Frequently Asked Questions

What is an escalator?

It is a moving staircase that carries people between floors on a chain of steps, with handrails that move at the same speed.

What is the difference between an escalator and a moving walkway?

An escalator has steps and connects floors. A moving walkway has a flat surface and carries people across a long distance on the level or on a gentle slope.

What is the standard escalator angle?

30 degrees is the common angle, and 35 degrees is used in some cases where space is limited. Confirm the options and rules with your manufacturer.

What speed does an escalator run at?

Commonly around 0.5 metres per second, though it depends on the design and standards.

Are escalators safe?

Properly designed, installed and maintained escalators are safe, and safety features such as emergency stops, brakes and comb plates help. Passengers should follow the signage, supervise children and avoid loose clothing near the steps.

Can escalators save energy?

Yes. Modern drives can slow or stop the escalator when no one is using it and restart when a sensor detects a passenger.

How often does an escalator need servicing?

It depends on usage and conditions. Escalators in busy malls and stations need frequent attention. Your AMC should set out the visit schedule.

Continue planning your project

Standards and project checks

Confirm the current standard edition and local approval requirements for the proposed equipment with your designer and lift provider. Request model-specific certificates, test records and handover documents.

Reference: BIS — find the applicable Indian Standard.